Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Action Clutch 88-93 Toyota Celica All Trac 2.0L (3S-GTE) Turbo AWD Stage 3 Clutch Kit (1MS)Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will
Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability. At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time. 170% INCREASED HOLDING CAPACITY OVER FACTORY KIT HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACINGThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1988-1992 | Toyota | Celica | All Trac |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1425 reviews
Sort
Product Reviews
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great.
This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over.
It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement.
It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way.
Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great
Why did you pick this product vs others?:
Fair price for the amount of coverage, good quality
Works well:
Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
Great product - Add foam product for complete solution
Model: 36 SqFt(3.4 SqM)
Used in two cars with speaker upgrades. Easy to install but get the roller for assured adhesion.removes "tinnyness" from large metal resonators. Use with foam absorptive material for a complete system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
recommand products
Lincoln Impinger 1600-3E Impinger Low Profile (1600 Series) Conveyor Ovens
30239.00
TurboWorks Intake Pipe Audi A3 S3 TT 2015+ VW Golf MK7 GTI R 2015+
95.46
Lincoln Impinger 1180-2E Impinger II (1100 Series) Conveyor Ovens
17144.05
trueBrowns Black Velvet Dress
121.13
Lincoln Impinger 1180-FB1G Impinger II (1100 Series) Conveyor Ovens
9005.98